 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| ELECTRONIC COMPONENTS RSG RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 info@rsg-electronic.de www.rsg-electronic.de Anderungen vorbehalten / subject to change without notice 800W Parallel Type With PFC Function Features : SCP-800 series AC 180~260VAC input PF> 0.98@ 230VAC Protections: Short circuit/ Overload/ Over voltage/ Over temperature Built in remote sense function Built-in remote ON-OFF control Power good signal With parallel function(N+1) Can adjust from 20~100% output voltage by external control 1-5V Forced air cooling by built-in DC fan 3 years warranty SPECIFICATION ORDER NO. SAFETY MODEL NO. DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT VOLTAGE ADJ. RANGE LINE REGULATION LOAD REGULATION SETUP, RISE, HOLD TIME VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR INPUT EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (max.) LEAKAGE CURRENT(max.) OVER LOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE Note.4 SCP-800-09 800S-P009 9V 88A 0 ~ 88A 792W SCP-800-12 800S-P012 12V 66A 0 ~ 66A 792W 120mVp-p SCP-800-15 800S-P015 15V 53A 0 ~ 53A 795W 150mVp-p SCP-800-18 800S-P018 18V 44.4A 0 ~ 44.4A 800W 180mVp-p SCP-800-24 800S-P024 24V 33A 0 ~ 33A 792W 240mVp-p SCP-800-36 800S-P036 36V 22.2A 0 ~ 22.2A 800W 360mVp-p SCP-800-48 800S-P048 48V 16A 0 ~ 16A 768W 480mVp-p SCP-800-60 800S-P060 60V 13A 0 ~ 13A 780W 500mVp-p 1.0% 0.5% 0.5% RIPPLE & NOISE (max.) Note.2 90mVp-p 3.0% Typical adjustment by potentiometer 1.0% 1.0% VOLTAGE TOLERANCE Note.3 1.5% 0.5% 1.0% 180 ~ 260VAC 47 ~ 63Hz >0.98 / 230VAC 83% 5.0A / 230VAC 60A / 230VAC 3.5mA / 240VAC 105~115% rated output power 84% 85% 0.5% 0.5% 0.5% 0.5% 20% ~ 100% adjustment by 1 ~ 5VDC external control 1.0% 1.0% 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 800ms, 400ms, 12ms at full load 260 ~ 370VDC see the derating curve 86% 88% 88% 89% 90% Protection type : Current limiting, delay shut down o/p voltage, re-power on to recover 110 ~ 135% Follow to output set up point Protection type : Shut down o/p voltage, re-power on to recover >100 / measure by heat sink, near transformer Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -20 ~ +65 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85 0.04% / 10~95% RH (0 ~ 50 ) 10 ~ 200Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, OP/FG:100M Ohms / 500VDC SAFETY & ISOLATION RESISTANCE EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) class A EMC (Note. 5) Compliance to EN61000-3-2,3 HARMONIC CURRENT EMS IMMUNITY POWER GOOD SIGNAL SPECIAL FUNCTION OTHERS COOLING MTBF DIMENSION PACKING NOTE Compliance to EN61000-4-2,3,4,5,6,8,11, Light industry level, criteria A Open collector of NPN transistor DC Voltage Adj., remote sensing, remote control, parallel operation(refer to control terminal instruction manual) By fan, >20% load or >50 fan on 74.9K hrs min. MIL-HDBK-217F(25 290*120*68mm (L*W*H) 2.3kg; 8pcs / 20kg / CARTON ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Current limiting 3 times(1.5s,3.0s,5.0s)Then intelligent auto recovery before shut down 5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name: SCP-800-SPEC 2006-03-28 800W Parallel Type With PFC Function Mechanical Specification SCP-800 series Unit:mm 18.5 9.2 11 41.0 10.0 190.0 10.0 39.0 30.0 CN1 38.0 68.0 1 23 #6-32-4 M3(NUT)X3H-4 12345678 LED Vadj NEG- 15.0 POS+ 120.0 9.0 251.0 30.0 14.0 M3(NUT) 3H-4 AIR FLOW DC OUTPUT AC INPUT POS M6.0 NEG 26.5 17.0 Terminal Pin. No. Assignment Pin No. 1 2 3 Assignment AC/L AC/N FG Control terminal Pin. No. Assignment (CN1) : Dinkle 51HDBC-O8P or equivalent Pin No. 1 2 3 4 Assignment VS+ VSVCI VCO Pin No. 5 6 7 8 Mating With Assignment PG PAR Dinkle 51SDB-O8P or equivalent GND INH Derating Curve Ta=25 100 800 700 80 OUTPUT POWER (W) 600 550 400 450 300 LOAD (%) 60 40 20 -20 -10 10 20 30 40 50 60 70 90 110 150 89.0 170 BOTTOM SIDE 260 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (VAC) 60Hz File Name: SCP-800-SPEC 2006-03-28 ELECTRONIC COMPONENTS RSG RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 info@rsg-electronic.de www.rsg-electronic.de Anderungen vorbehalten / subject to change without notice |
Price & Availability of SCP-800
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |